Black Friday Sale! 15% off store wide
-- No --
Free Shipping On orders over $49
Ships today if ordered within 00:00:00
Senninger 3/4\" FPT x 3/4\" MHT Pressure Regulator

Senninger 3/4" FPT x 3/4" MHT Pressure Regulator

Product Videos
Product Files
Product Description

This model PRLG regulates the pressure within your drip irrigation system for optimal performance of your system components. This model connects to a male pipe threaded connection on the inlet side and has a male hose thread connection on the outlet side. The male hose thread outlet makes it easy to connect common drip system kits with garden hose connections directly to the pressure regulator. Choose the appropriate preset PSI rating for your application. The pressure regulator shall maintain the predetermined operating pressure provided the inlet pressure is at least 5 PSI above the expected outlet pressure, but must not exceed the maximum inlet pressure rating. Always install pressure regulators downstream from all shut-off valves. Be sure to install pressure regulators in the proper direction. The arrow on the housing shows the direction of the flow and should always point downstream toward emitters.


  • Low hysteresis and friction loss
  • Can be Installed above or below ground
  • Large flow path resists plugging
  • No external metal parts
Please note: Irrigation pressure regulators need outflow and back pressure to regulate the pressure within your irrigation system. With no water flowing through the regulator, the inlet and outlet pressures will measure the same. To verify the pressure maintained in your system, you will need to place a pressure gauge at the end of one of zones, turn the zone on, let it pressurize and once the lines have filled and emitters begin to flow then take the reading. This will reflect the working pressure within your system.
Special note: This pressure regulator is not designed to operate under static (constant) pressure. It must be installed after any valves or timers to operate correctly. Using this item under static pressure will eventually weaken the internal spring and cause the regulator to fail.
Product Specifications
If you are not finding the information you need or the information on this page is confusing, please let us know so we can help you (and others). Thank you.