Perma-Loc Tubing Reducing Cross

Perma-Loc Tubing Reducing Cross

˂
˃
Ask A Question
Product Videos
Product Description
This fitting is used to connect various sizes of poly tubing.

Perma-Loc 500 Series adapters allow you to connect different sizes of poly tubing.  Perma-Loc 500 Series fittings are compatible with any poly tubing with an inside diameter of .520 inches.  The most common manufacturers of this type of tubing are:

  • RainDrip .520 ID (Inside Diameter)
  • RainBird .520 ID (Inside Diameter)

About Drip Depot Perma-Loc Drip Irrigation Fittings:

Perma-Loc fittings are heavy duty reusable connectors, adapters and fittings for all your connection needs. They are very easy to use and require no special tools. Perma-Loc fittings are available for both Tubing and Tape. The Tubing connectors can be used on blank tubing as well as drip line.

  • To use: Simply push tubing or tape over barbed end, then hand-tighten locking nut over tubing or tape for a permanent secure fit.
  • To Remove: Just loosen locking nut, pull tube off and re-use as needed.

Perma-Loc fittings look similar to traditional flange and locking nut plumbing connections; however, in most cases, they work differently. Unlike a typical locking nut, which comes off the fitting and slides over the tubing, a Perma-Loc locking nut is usually not removed from the fitting. The exception to this rule are some of the larger 3/4" and above tubing fittings.  Select a video from above to see how the Perma-Loc drip irrigation tubing and tape fittings work.

Product Specifications