Lead Free PRV3 Brass Pressure Reducer by Aqualine

Lead Free PRV3 Brass Pressure Reducer by Aqualine

Product Description

The PRV3 Pressure Reducer from Aqualine is lead free brass construction. Has a durable PVC bonnet and stainless steel nuts and bolts. NPT x Union connections. This item is rated for constant (static) pressure and will reduce the pressure in your system to the desired preset PSI. Unit is adjustable and factory preset at 50 PSI.

Installation Tips: 

  • Flush dirt and scale from supply pipe
  • Install regulator vertically or horizontally (upright or inverted),but the regulator must be installed with the arrow in the direction of flow
  • Regulator is preset at 50 PSI. To adjust, loosen lock nut and turn adjusting screw clockwise to increase, counterclockwise to decrease, then re-tighten lock nut
  • This regulator has a built-in thermal expansion bypass. If the inlet pressure is higher than the discharge setting of the water heater (typically 150 PSI) or if there is a check valve or backflow preventer installed on the line, you must make provisions for pressure relief protection to protect your plumbing system and its components
  • Should be installed in an accessible location

Maintenance Tips:

  • To clean strainer or replace seat/stem module shut-off supply, loosen locknut and back off adjusting screw
  • Replace module and reassemble valve
  • Re-adjust pressure setting
Product Specifications
If you are not finding the information you need or the information on this page is confusing, please let us know so we can help you (and others). Thank you.