Irritec Tape x Spigot Adapter
Perma-Loc Tape x Socket/Spigot Adapter is used to connect a run of drip tape to a PVC pipe or connector. Perma-loc connection is available for 5/8" or 7/8" drip tape. The PVC connection is socket (female) fitting over the smaller sized pipe or spigot (male) fitting inside the larger sized PVC slip fitting.
As an example: a socket/spigot size 3/4" / 1" means the slip connection fits over the 3/4" PVC pipe or is the same outside dimension as a 1" PVC pipe. Slip connections require the use of primer/glue for solvent weld connection.
About Drip Depot Perma-Loc Drip Irrigation Fittings:
Perma-Loc fittings and adapters are heavy duty reusable connectors for all your connection needs. They are very easy to use and require no special tools. Perma-Loc fittings are available for both Tubing and Tape. The Tubing connectors can be used on blank tubing as well as drip line.
- To Use: Simply push tubing or tape over barbed end, then hand-tighten locking nut over tubing or tape for a permanent secure fit.
- To Remove: Just loosen locking nut, pull tube off and re-use as needed.
Perma-Loc fittings look similar to traditional flange and locking nut plumbing connections; however, in most cases, they work differently. Unlike a typical locking nut which comes off the fitting and slides over the tubing, a Perma-Loc locking nut is usually not removed from the fitting. The exception to this rule might be some of the larger 3/4" and above tubing fittings. Select a video from above to see how the Perma-Loc drip irrigation tubing and tape fittings work.
Perma-Loc tape fittings are compatible with: Chapin Tape, Irritec P1 Tape, John Deere T-Tape, and Toro Aqua-Traxx Tape