Irritec Perma-Loc Tubing X Socket / Spigot Adapter
Perma-Loc Tubing x ABS Socket/Spigot Adapter is used when attaching 1" poly tubing directly to PVC pipe or fitting. The PVC/ABS connection requires the appropriate primer/glue.
About Drip Depot Perma-Loc Drip Irrigation Fittings:
Perma-Loc fittings and adapters are heavy duty reusable connectors for all your connection needs. They are very easy to use and require no special tools. Perma-Loc fittings are available for both Tubing and Tape. The tubing connectors can be used on blank tubing as well as drip line.
- To Use: Simply twist the locking collar back towards the center of the fitting exposing the barb. Then push tubing or tape over barbed end. Next, hand-tighten locking nut over tubing or tape for a permanent secure fit.
- To Remove: Just loosen locking nut, pull tube off and re-use as needed.
Perma-Loc fittings look similar to traditional flange and locking nut plumbing connections; however, in most cases, they work differently. Unlike a typical locking nut which comes off the fitting and slides over the tubing, a Perma-Loc locking nut is not removed from the fitting.
|Perma-Loc Series||Nominal Size||Acceptable Inside Tubing Diameter||Acceptable Wall Thickness|
|500||3/8"||.510" to .580"||.035" to .055"|
|600||1/2"||.590" to .630"||.025" to .050"|
|800||3/4"||.790" to .845"||.045" to .065"|
|1000||1"||1.025" to 1.085"||.045" to .070"|
The Perma-Loc connector on this fitting is compatible with Drip Depot polyethylene tubing of the same size.