Irritec Perma-Loc Tubing x FPT Tee Adapter

Irritec Perma-Loc Tubing x FPT Tee Adapter

˂
˃
Product Description
This Perma-Loc Tubing x FPT Tee Adapter has perma-loc connections on the left/right points and a female pipe threaded connection on the center point. Could be used to run poly tubing of corresponding size in 2 directions from a male pipe threaded connection. 

About Drip Depot Perma-Loc Drip Irrigation Fittings:

Perma-Loc fittings and adapters are heavy duty reusable connectors for all your connection needs. They are very easy to use and require no special tools. Perma-Loc fittings are available for both Tubing and Tape. The Tubing connectors can be used on blank tubing as well as drip line.

  • To Use: Simply push tubing or tape over barbed end, then hand-tighten locking nut over tubing or tape for a permanent secure fit.
  • To Remove: Just loosen locking nut, pull tube off and re-use as needed.

Perma-Loc fittings look similar to traditional flange and locking nut plumbing connections; however, in most cases, they work differently. Unlike a typical locking nut which comes off the fitting and slides over the tubing, a Perma-Loc locking nut is usually not removed from the fitting. The exception to this rule might be some of the larger 3/4" and above tubing fittings. Select a video from above to see how the Perma-Loc drip irrigation tubing and tape fittings work.

Perma-Loc Size Acceptable Inside Tubing Diameter Acceptable Wall Thickness
3/8".510" to .580".035" to .055"
1/2".590" to .630".025" to .050"
3/4".790" to .845".045" to .065"
1"1.025" to 1.085".045" to .070"

The Perma-Loc connector on this fitting is compatible with Drip Depot polyethylene tubing of the same size. 

Product Accessories
Questions?
If you are not finding the information you need or the information on this page is confusing, please let us know so we can help you (and others). Thank you.