Irritec Perma-Loc Tubing x Barb Takeoff Adapter
Perma-Loc Tubing x Barbed Takeoff Adapter is used to run our 1/2" ( .600” ID x .700" OD) poly tubing off a 3/4" or larger mainline tubing. This Perma-Loc fitting requires a 7.0mm Punch to insert the 400 series Barb into mainline tubing.
- 7.0 (400 barb) is recommended for flow rates of up to 2.5 GPM per line
About Drip Depot Perma-Loc Drip Irrigation Fittings:
Perma-Loc fittings and adapters are heavy duty reusable connectors for all your connection needs. They are very easy to use and require no special tools. Perma-Loc fittings are available for both Tubing and Tape. The tubing connectors can be used on blank tubing as well as drip line.
- To Use: Simply twist the locking collar back towards the center of the fitting exposing the barb. Then push tubing or tape over barbed end. Next, hand-tighten locking nut over tubing or tape for a permanent secure fit.
- To Remove: Just loosen locking nut, pull tube off and re-use as needed.
Perma-Loc fittings look similar to traditional flange and locking nut plumbing connections; however, in most cases, they work differently. Unlike a typical locking nut which comes off the fitting and slides over the tubing, a Perma-Loc locking nut is not removed from the fitting.
| Perma-Loc Series | Nominal Size | Acceptable Inside Tubing Diameter | Acceptable Wall Thickness |
|---|---|---|---|
| 500 | 3/8" | .510" to .580" | .035" to .055" |
| 600 | 1/2" | .590" to .630" | .025" to .050" |
| 800 | 3/4" | .790" to .845" | .045" to .065" |
| 1000 | 1" | 1.025" to 1.085" | .045" to .070" |
