Irritec Perma-loc Tape x Layflat Valve
These perma-loc tape x layflat valves are an easy way to connect your drip tape runs directly to your layflat hose. Provides easy on/off functionality to each drip tape run for complete control of your irrigation needs. Available for 5/8" and 7/8" drip tape.
Compatible Installation Tools
Item #1790 (A2-TV5LF) Layflat x 5/8" Perma-Loc Tape Valve:
- Cutter - #1791 (B5-CLF14B) orange handle cutter creates a 14mm (.550") hole for all standard size layflat fittings
Item #14796 (A2-TV7LF19-O) Layflat x 7/8" Perma-Loc Tape Valve:
- Cutter - #7912 (B5-CLF19R) blue handle cutter creates a 19mm (.750") sized hole for large hole layflat fittings
Please Note: Irritec T-Handle Hex Tool is not compatible with this item.
About Drip Depot Perma-Loc Drip Irrigation Fittings:
Perma-Loc fittings and adapters are heavy duty reusable connectors for all your connection needs. They are very easy to use and require no special tools. Perma-Loc fittings are available for both Tubing and Tape. The Tubing connectors can be used on blank tubing as well as drip line.
- To Use: Simply push tubing or tape over barbed end, then hand-tighten locking nut over tubing or tape for a permanent secure fit.
- To Remove: Just loosen locking nut, pull tube off and re-use as needed.
Perma-Loc fittings look similar to traditional flange and locking nut plumbing connections; however, in most cases, they work differently. Unlike a typical locking nut which comes off the fitting and slides over the tubing, a Perma-Loc locking nut is usually not removed from the fitting. The exception to this rule might be some of the larger 3/4" and above tubing fittings. Select a video from above to see how the Perma-Loc drip irrigation tubing and tape fittings work.
Perma-Loc tape fittings are compatible with: Chapin Tape, Irritec P1 Tape, John Deere T-Tape, and Toro Aqua-Traxx Tape
