Hydro Rain PVC-Lock 2 in 1 Drip Regulator & Filter
HydroRain's 2-in-1 Push-Fit drip filter and pressure regulator stands in the market, with no equal, as one of the industry’s best “one piece” low flow irrigation filter and regulator combinations. On the outside, the 2-in-1 Push-Fit model moves away from the competitions traditional plastic construction, to a design of strength and durability featuring commercial grade glass-filled nylon. Inside, the 2-in-1 Push-Fit model can handle water flow as low as 0.1 GPM and inlet pressure up to 80 PSI. The 2-in-1 Push-Fit model offers 30 PSI pressure regulation, a 200 mesh filter and a 1" MPT (male pipe thread) outlet.
- Pressure regulation at 30 PSI
- Removable 200 mesh filter screen with easy-flush service cap makes flushing fast and simple, no tools required
- Durable glass-filled nylon construction for years of reliable service
- Easy connection to HydroRain PVCL valves
Always install pressure regulators downstream from all shut-off valves. Be sure to install pressure regulators in the proper direction. The arrow on the housing shows the direction of the flow and should always point downstream toward emitters.Please note: Irrigation pressure regulators need outflow and back pressure to regulate the pressure within your irrigation system. With no water flowing through the regulator, the inlet and outlet pressures will measure the same. To verify the pressure maintained in your system, you will need to place a pressure gauge at the end of one of zones, turn the zone on, let it pressurize and once the lines have filled and emitters begin to flow then take the reading. This will reflect the working pressure within your system.
Hydro-Rain is the commercial division of Orbit so when you purchase a Hydro-Rain product, you will get all of the same reliability and product confidence you have come to expect from Orbit.