Order in multiples of
You can also...
Add-It Proportioning Fertilizer Injector//images.dripdepot.com/image/54ac61b375eb5171bb600000/360x360 //images.dripdepot.com/image/54ac61b375eb516d85550000/360x360
1/2 GPM minimum, 100:1 ratio water to fertilizer liquid, 10 psi minimum operating pressure, 35 gallons water will empty injector
See brochure and "product links" section above for detailed item information.
Measurements: top to bottom is 10 5/8 inches and Inlet to outlet is 4 5/8 inches
Add-It Proportioning Fertilizer Injector (1.5 Quart size) is Designed for home and garden use. Quart sizes use hose threads. Easy to operate for either drip and sub-surface irrigation or with sprinkler systems. Injects fertilizer at a consistent, predetermined ratio (see below). Minimum flow of 10 PSI pressure is required. Backflow device must be installed before the injector and a filter is recommended when injecting fertilizers into drip irrigation. Injector does not need a by-pass as running water through the empty unit will not harm it.
2 GPM minimum, 300:1 ratio water to fertilizer liquid, 75 gallons water will empty injector.
Special Note: Although the literature for this item references a backflow preventer, filter and pressure regulator, the item sold here is the fertilizer injector only. Backflow preventer, filter and pressure regulator must be purchased separately if needed.
With the advent of drip irrigation, how do you fertilize plant material? Amid the continuing concern over water shortages, it appears that many commercial growers, landscape contractors, as well as homeowners, are either initially installing, or converting to, drip irrigation. But this change poses yet another dilemma. How do you fertilize the plant material if utilizing a drip irrigation system in order to conserve water, as well as save time and money? No longer can you broadcast dry granular fertilizer onto the soil surface and expect it to be leached into the soil by overhead watering where the plant"s roots can pick-up the nutrients. Therefore,the fertilizer must be dispensed directly into the irrigation system itself!
Recognizing there was a real need to not only conserve water by utilizing drip irrigation, but also fertilize plant material, Strong Enterprises designed and patented a fertilizer injector. These injectors make fertilizing not only easy, but economical and efficient as well! Add-It fertilizer injectors fit into any drip, sub-surface or conventional sprinkler irrigation system, and are totally proportioning. In other words, the concentration of fertilizer being delivered is at a constant rate from start to finish, unlike some other injectors! They accept any totally water-soluble fertilizer on the market today like Scotts Miracle Gro and Peters Professional when premixed with water. In addition, a wetting agent can be dispensed to breakup compacted soils, micro-nutrients and Vitamin Institute"s SUPERthriveTM containing vitamins and hormones for healthier plants, and vitamin B-1 when transplanting trees and shrubs. Add-It can also be installed before a manifold of valves under full line constant pressure up to 125 PSI, or can be installed after a single control valve. A fertilizer injector is an essential part of any drip irrigation system, as are a filter and pressure regulator.
The concept of fertilizing directly through the irrigation system, commonly known as fertigation, has been used by the agricultural community for quite some time. When commercial growers began to utilize drip irrigation and abandoning flood or conventional overhead sprinklers, they immediately realized that they must also provide a method to fertilize their crops. Thus sprang the concept of fertigation.
Lawns, trees, shrubs, and potted plants absorb fertilizer more efficiently when it's in liquid form. Why?Because liquid fertilizers not only work faster than dry pellets or granules, they move through the soil and are more readily available for absorption by your lawn or garden plants. Therefore less fertilizer is used, making it more environmentally friendly.
Over many years, tests have concluded that applying liquid fertilizer on a regular basis is much more beneficial to a plant than being fed infrequently with a dry, granular form of fertilizer. Liquid fertilizer is absorbed far more easily by a plants root system, and there are no leftover residues or minerals that can, over a period of prolonged use, damage a plant or lawn.
Many homeowners, landscape contractors and commercial growers already know about the numerous benefits of fertigation. In particular, no longer have to laboriously spread fertilizer by hand, using spreaders and/or hose-end applicators, thus saving significantly on labor and on the cost of fertilizer. It"s a win, win,situation. Everyone saves and the plants do better. Once a fertilizer injector is installed into either a drip or conventional sprinkler irrigation system, fertilizer travels with the water directly to the plants or turf, creating healthier plants! And, as an additional benefit, surfactants (wetting agents) can also be injected to help break-up compacted soils, root hormones and micro-nutrients for healthier plants, as well as vitamin B-1 when transplanting trees and shrubs.
The Add-It fertilizer dispenser is guaranteed for a period of one year from the date of purchase against defective materials and workmanship when installed and operated per instructions and used in a normal manner. Buyer assumes all responsibility for safety and use not in accordance with instructions and directions.