2" T-Super Filter w/Scanaway Assembly by Amiad
Amiad has some of the most innovative filters in the industry. Keeping your filter in top-notch operation involves monitoring and cleaning on a regular schedule. Amiad helps make this task quicker and easier with the Scanaway assembly on this 2" filter. The T-Super filter is already easy to install and comes apart for easy cleaning without tools, but the Scanaway feature lets you easily clean the filter screen without removing or even turning off the water flow. Simply turning the handle turns the suction scanner inside in a spiral movement so it rotates inside
the screen surface without touching the screen mesh. This suction action cleans the debris from the inside of the filter screen.
Amiad plastic filters are built to last, from high quality engineered-plastic materials providing greater chemical resistance and excellent mechanical strength and durability. The weavewire screen elements are available in many filtration degrees for most applications. The filter includes a Clogging Indicator for visual monitoring when the filter needs cleaned.
How the ”Scanaway” Assembly Works: The Scanaway assembly consists of a suction-scanner and a hollow pipe with suction nozzles that face the inner side of the screen. Outside the filter, a handle is connected to the suction-scanner, allowing turning of the scanner in a spiral movement so it rotates inside the screen surface without touching the screen mesh. Opening the exhaust valve at the filter lid creates low pressure conditions in the suction-scanner, which causes the scanner nozzles to suck in the dirt particles from the screen surface and expel the dislodged particles out through the exhaust valve. Scanning is done during the filtration process without interrupting the flow of process water through the filter.
How the ”Clogging Indicator” Works: The Clogging Indicator is a special feature mounted on the filter pressure check points and acts like a “traffic light”. When the pressure differential across the screen reaches a pre-set value of 7 psi (0.5 bar). The red button of the Clogging Indicator pops up to visually indicate that the filter needs to be cleaned.
- Simple turn-of-a-handle cleaning of the filter screen with scanaway assembly
- Includes clogging indicator for visual indication of when cleaning is required
- No need for turning off the water and extracting the filter screen for rinsing
- No interruption of the process water flow during cleaning
- Low pressure loss
- Filter elements are constructed of molded plastic ribs that support a stainless steel weavewire screen
For assistance with selecting the best mesh or micron size to meet your filtration needs, see these helpful resources on the Drip Depot website.