Signature 63XA Pop-Up Sprinkler Body
Signature - 63XA Series Standard Pop-Up Sprinkler Body
The Signature 63XA is designed with high impact corrosion resistant construction including stainless steel metal components. The dome cap design of the 63XA will ensure sand and debris flush away from the riser to provide for longer life and the double lipped wiper seal will help keep debris away from the riser. The 63XA sprinkler body connects to standard male threads on the riser.
- High impact corrosion resistant construction with stainless steel metal components.
- Dome cap design will ensure sand and debris flush away from the riser to provide for longer life.
- Double lipped wiper seal will help keep debris away from the riser.
- ½” bottom inlet is standard on all models.
- All models can be upgraded with an anti-drain valve (ADV) and the new iStop™.
- The iStop® feature shuts off water flow if the nozzle is removed or if the riser is broken off any where above cap when popped up
- Standard male thread on the riser.
- Operating range: 15-60 psi
- Optimum Pressure: 30 psi
- Maximum pressure: 60 psi
- Sealing Pressure: 10 psi
- Pop-Up Height:
- 2½” (63XA-02)
- 4” (63XA-04)
- 6” (63XA-06)
- 12” (63XA-12)
- Flush Rate: 0.2 GPM
- Inlet size: ½" NPT Female thread
- Check Height: 10 ft elevation change
- Screen Mesh: .045 sq. in. /1150 micron
Note: Spray Nozzles for Signature Spray Bodies are sold separately!
|Drip Depot Item#||Signature Item#||Pop-Up Height||Body Height|