Senninger 3/4" Pipe Thread Pressure Regulator
3/4" FPT X 3/4" MPT Senninger Pressure Regulator maintains the pressure within the drip irrigation system. Use with compatible sized pipe thread fittings. Choose the appropriate preset PSI rating for your application (normally 25 PSI for poly tubing and 10 PSI for drip tape). The pressure regulator shall maintain the predetermined operating pressure provided the inlet pressure is at least 5 PSI above the expected outlet pressure, but must not exceed the maximum inlet pressure rating. Always install pressure regulators downstream from all shut-off valves. Be sure to install pressure regulators in the proper direction. The arrow on the housing shows the direction of the flow and should always point downstream toward emitters.
- Low hysteresis and friction loss
- Can be Installed above or below ground
- Large flow path resists plugging
- No external metal parts to corrode
|Special note: This pressure regulator is not designed to operate under static (constant) pressure. It must be installed after any valves or timers to operate correctly. Using this item under static pressure will eventually weaken the internal spring and cause the regulator to fail.|