Senninger Pressure-Master 3/4\" x 3/4\" FPT Regulator - Medium Flow

Senninger Pressure-Master 3/4" x 3/4" FPT Regulator - Medium Flow

Ask A Question
Product Files
Product Description

Senninger Model PMR-MF ¾" x ¾" FPT Regulator - Medium Flow

Senninger Medium Flow Pressure-Master Regulator is ideal for installations requiring mid-range flows of 2 – 20 GPM, including solid set, drip or other low volume irrigation, as well as center pivot and other mechanical-move systems. Each regulator maintains a constant preset outlet pressure based on its flow / inlet pressure. Note: With no water flow through the regulator, the inlet and outlet pressures will be the same.

Features: 

  • 100% water tested for accuracy at Senninger’s in-house facilities
  • Can be installed above or below ground
  • Large flow path resists plugging
  • Very low hysteresis and friction loss
  • Pressure Range: 6 to 60 psi
  • Flows: 2 to 20 GPM
  • Backed by a two year warranty on materials, workmanship and performance

Model # Preset Operating Pressure Maximum Inlet Pressure Flow Range
PMR-MF-6 6 psi 100 psi 4–16 gpm
PMR-MF-10 10 psi 120 psi 4–16 gpm
PMR-MF-12 12 psi 135 psi 2–20 gpm
PMR-MF-15 15 psi 150 psi 2–20 gpm
PMR-MF-20 20 psi 150 psi 2–20 gpm
PMR-MF-25 25 psi 150 psi 2–20 gpm
PMR-MF-30 30 psi 150 psi 2–20 gpm
PMR-MF-35 35 psi 150 psi 2–20 gpm
PMR-MF-40 40 psi 150 psi 2–20 gpm
PMR-MF-50 50 psi 150 psi 2–20 gpm
PMR-MF-60 60 psi 150 psi 2–20 gpm

Special Notes:

  • Caution: Always install pressure regulators downstream from all shut-off valves.
  • Be sure to install pressure regulators in the proper direction. The arrow on the upper housing shows the direction of the flow and should always point downstream toward emitters.
Product Specifications