Retrofit Drip Kit

Retrofit Drip Kit

Ask A Question
Product Description

Four-Outlet Drip Irrigation Manifold Kit

DIG's Four-Outlet Drip Irrigation Manifold Kit is a complete kit utilizing a four outlet, high flow emission device to retrofit an existing 1/2" sprinkler riser into a four outlet drip irrigation system without altering or increasing the flow of the sprinkler system zone. The four-outlet drip irrigation manifold with 1/2" female pipe thread is a pressure compensating head operating at a pressure range of 10-50 PSI with an even flow rate of 6 gallons per hour (GPH) per each outlet. The Four-Outlet PC Drip Irrigation Manifold Kit allows installation flexibility when incorporated into a new system or as a part of a sprinkler system zone. The four-outlet manifold has four barbed outlets and 50' of 1/4" micro tubing to deliver the water under the plant canopy and includes stakes to hold the micro tubing in place. The four-outlet manifold can also incorporate 1/4" drip line or drip emitters with a maximum flow of 6 GPH to achieve good root zone coverage of individual plants or groups of plants.


  • Replacing the sprinkler riser with the four-outlet manifold can lead to water savings of 50% to 70%
  • Built with backup screen filter
  • Color coded
  • Can be used to water roses, shrubs, groundcover, and trees
  • Complete kit; all parts included
  • Applies water directly to the plant root zone area, leading to less surface evaporation from leaves and soil
  • Eliminates wet walls and discoloration and staining of fences and windows
  • Designed for new and existing landscapes, including oddly shaped areas where a sprinkler head cannot provide good coverage
  • No special tools or glue are needed
  • DIG's drip irrigation products may be exempt from residential and commercial watering restrictions (check local codes)
  • Barbed elbow outlets allow installation flexibility
  • Pressure compensating feature allows for equal flow rates from each outlet
  • Install above grade, or place below grade in a 6" emitter box
  • Use with any 1/4" micro tubing

  • Product Specifications