Primerus Pot-Dripper Ring
The newest innovation in container watering is the Primerus Pot-Dripper Ring. The Pot-Dripper applies water and nutrients evenly to your entire container with no overspray so no wasted water!
The heart of the Pot-Dripper Drip Ring is the Pot-Dripper Stake. This innovative feeder stake connects to a section of 1/4″ dripline to make a ring of various sizes to fit your container. The Pot-Dripper stake is made from the same high-quality acetal used for the Spot-Spitter and will last for many years. A unique barbless tapered connector holds the tubing ring tightly but also allows you to easily remove one end of the ring to install it around an existing plant or to remove it when you take a container out of service. The stake also includes a shut-off post, similar to the spot spitter stakes, so you can easily remove the 1/8" supply tubing from the drip post and slip it over the shut-off post when you do not wish to water that specific pot. The stake uses 1/8" supply tubing, either installed directly into the main supply tubing or, if more precise watering is desired, use a PC CNL drip emitter in the mainline (hub dripper) and connect the 1/8" supply tubing to the outlet of the drip emitter.
Please note: The flow rate of the Pot-Dripper ring is determined by the number of emitters in the section of dripline used to form the ring. The 1/4" dripline is non pressure compensating with 0.5 GPH emitters spaced every 6 inches. For more precise flow rate please use 'hub' drippers as mentioned in the description above.