
Perma-Loc Tubing Coupling Valve
Perma-Loc Tubing Coupling Valve
These Perma-Loc fittings are used to connect two sections of the same size polyethylene tubing where on/off functionality is needed. A ball valve is located in the middle of the coupling for easy on/off function.
About Drip Depot Perma-Loc Drip Irrigation Fittings:
Perma-Loc fittings are heavy duty reusable connectors, adapters and fittings for all your connection needs. They are very easy to use and require no special tools. Perma-Loc fittings are available for both Tubing and Tape. The Tubing connectors can be used on blank tubing as well as drip line.
- To use: Simply push tubing or tape over barbed end, then hand-tighten locking nut over tubing or tape for a permanent secure fit.
- To Remove: Just loosen locking nut, pull tube off and re-use as needed.
Perma-Loc fittings look similar to traditional flange and locking nut plumbing connections; however, in most cases, they work differently. Unlike a typical locking nut, which comes off the fitting and slides over the tubing, a Perma-Loc locking nut is usually not removed from the fitting. The exception to this rule are some of the larger 3/4" and above tubing fittings. Select a video from above to see how the Perma-Loc drip irrigation tubing and tape fittings work.
Perma-Loc Size | Acceptable Inside Tubing Diameter | Acceptable Wall Thickness |
---|---|---|
3/8 inch | .510 to .580 inches | .035 to .055 inches |
1/2 inch | .590 to .630 inches | .025 to .050 inches |
3/4 inch | .790 to .845 inches | .045 to .065 inches |
1 inch | 1.025 to 1.085 inches | .045 to .070 inches |