Netafim Pressure Reducing Valve
Netafim Pressure Reducing Valve is available in several size options with slip or FPT inlet/outlet connections. Some sizes are available in nylon or PVC material. Durable and reliable, this valve offers superior hydraulic performance in surface or subsurface applications.
- Yellow Spring for 7 - 30 PSI
- Lower operating pressures
- Durable construction for long life and corrosion resistance
- PVC Valve Body: uPVC
- Spring: Stainless Steel (AISI 302)
- Nuts, Bolts, Washers: Zinc Coated Steel (BS 5216)
- Diaphragm: Natural Rubber
Manual Valve Operation with a 3-Way Selector
Closed (C): Upstream pressure or pressure from an external source is applied to the control chamber. Initiated by the spring, the diaphragm is pressed down to close the valve drip-tight.
Open (O): Relieving the water or air pressure to the atmosphere from the control chamber causes the valve to open.
Automatic (A): The automatic port of the 3-Way selector is connected to a solenoid, hydraulic relay or pilot which controls the valve. The common port of the 3-Way selector connects the control chamber to either A, O, or C, depending on the direction the selector is pointed.
Manufacturer Installation Tip for Threaded Valves: Use a few layers of Teflon tape or Teflon sealer compound on the adapter and tighten by hand. Use a wrench to tighten the adapter another half revolution.