Model 7001

Model 7001

Ask A Question
Product Description

This Battery Powered timer has a LCD display and 3/4" FPT fitting on both ends.  

Great for Residential and light commercial use. The controller can be installed directly to a PVC pipe using a threaded PVC male adapter or directly to a faucet or hose bib using a hose to pipe thread fittings, see installation instruction for details.

This controller is ideal for drip irrigation, soaker and sprinkler systems connected to a faucet or PVC pipe.

  • Six buttons with large integrated liquid crystal display
  • Operated by one high grade 9V alkaline battery
  • Watering duration from one minute to twelve hours in one minute increments
  • Frequency choices of 7 day weekly schedule or interval every 3 hours, 6 hours, 12 hours and every day to 30 days
  • Easy to read AM/PM clock and program with the use of six buttons
  • Four start times per day in a weekly mode
  • Weather resistant
  • Automatic, semi-automatic and manual operation
  • Choice of hose thread to pipe thread fitting included in the box
  • Easy to use manual start/stop button via the controller
  • Manual opening and closing via the orange manual lever
  • Irrigation can be suspended via the controller to prevent unnecessary irrigation during rainy weather (rain mode)
  • Low battery indicator to alert when battery is low
  • Battery life is up to two years
  • Emergency backup program of 5 minutes every 24 hours if no buttons are pressed in 10 minutes after battery installation
  • Controller can be detached via 30" coiled cable for easy
  • programming
Controller Specifications:
  • Controller and valve dimensions:4 1/4" W x 3-1/4" D x 6 1/4" H ( 11 cm W x 5.8 D x 15 cm H )
  • Dry latching solenoid
  • Power source: 9-volt DC (one 9-volt alkaline battery)
  • Solenoid adapter thread: 3/4"
  • Temperature range: 38 to 130 degree F
 Valve Specifications:
  • 3/4 inch NPT with female inlet and outlet included
  • Flow range: 1 to 28 gallons per minute
  • Operating pressure: 10 to 120 psi (special note: this timer requires at least 10 psi to function, therefore it will not work with low pressure or gravity feed systems)
  • Valve temperature: up to 180 degrees F
Flow Rate Chart vs. Pressure Loss
Flow rate (GPM)
Pressure loss(psi)
 X - not recommended
Controller Materials:
  • Body: ABS
  • Inner parts: actual
  • Solenoid inner metal parts: stainless steel
  • Valve Materials:
  • Valve body and cover: glass reinforced nylon
  • Diaphragm: nylon fabric reinforced polyisoprene (NR)
  • Metal parts and screws: stainless steel 303
  • Product Accessories
    Product Specifications