-- No --
Free Shipping On orders over $49
Ships today if ordered within 00:00:00
DIG Inline AC Valves w/ 24 VAC solenoid

DIG Inline AC Valves w/ 24 VAC solenoid

Product Files
Product Description

DIG’s heavy duty 24 VAC plastic inline valves are designed for reliable operation and superior hydraulic performance. They are suitable for above- or below-grade installation. This line of inline valves has an internal design that enables a high flow rate with low head loss, smooth valve opening and closing, low flow opening and actuation pressure with less risk for diaphragm erosion and distortion. Available with flow control option for making precise adjustments in any irrigation system.


  • Constructed of a UV-resistant, glass-reinforced nylon bonnet with a stainless steel spring and non-corrosive materials
  • High flow with low pressure loss
  • Operates in a wide range of flow rates
  • Normally closed
  • Large flow control handle making it easier than ever to adjust water flow and manual shutoff
  • Manual or automatic operation
  • Flow-control adjustment – can be used to reduce sprinkler over-spray
  • Smooth valve opening and closing prevents pressure surge hazards
  • The valve’s only moving component is its diaphragm with no shaft, seals, or bearings within the water passage
  • Unobstructed flow path for higher flow rate with lower head loss
  • Highly durable to chemical use with an irrigation system
  • Flexible balanced diaphragm and seal
  • Compatible with any 24VAC controller


  • Body Styles: inline (globe) valve
  • Operating pressure: 10 to 150 PSI
  • Operating flow range:
    • 3/4" size: .1 to 28 GPM (.23 to 6.4 m3h)
    • 1" size: .2 to 35 GPM (0.45 to 8 m3h)
    • 1 1/2" size: 20 to 132 GPM (4.5 to 30 m3h)
    • 2" size: 30 to 160 GPM (6.8 to 36 m3h)
  • Solenoid: 24VAC (50 -60 cycles)
  • Current: .032A (7.7 VA)
  • Holding Current: 0.16A (3.84 VA)
  • Power Consumption: 1.7/2.2 watts
  • Dimensions:
    • 3/4" and 1" valves: 4.5" H x 4.25" L x 3.12" W
    • 1 1/2" valve: 7.12" H x 6.12" L x 5.75" W
    • 2" valve: 8.5" H x 6.12" L x 5.75" W
  • Solenoid Thread Housing Size: 3/4”-20 UNES-2A


  • Body: glass-reinforced nylon
  • Bonnet: glass-reinforced nylon
  • Solenoid: glass-reinforced nylon
  • Spring and pins: Stainless steel
  • Bolts: Stainless steel
  • Encapsulated diaphragm seat assembly: Nylon fabric reinforced polyisoprene (NR)
  • Seat assembly: NBR
If you are not finding the information you need or the information on this page is confusing, please let us know so we can help you (and others). Thank you.