Barb Tubing Coupling Valve

Barb Tubing Coupling Valve

˂
˃
Product Videos
Product Description

Barbed Coupling Valve.  Use to connect two sections of tubing with shut-off valve. Valves are great to control, disperse, slow and/or divert water in all drip irrigation systems.

Features

  • Simple on-off operation and straight through flow.
  • Green cap for standard irrigation applications.
  • Purple cap is used for re-claimed water.
  • Black cap for general purpose.
  • UV stabilized materials for long life.

Applications: 

  • Secondary zone water diversion and flow control.
  • Gravity irrigation flow valve.  
  • Any situation where fluid restriction is needed. 

Quality barbed acetal fittings provide high retention in low-pressure poly tubing for long-term reliability of connections. These fittings can be confidently installed without clamps when matched with our quality low-pressure poly tubing with corresponding dimensions.

Features:

  • Sharp-edged barbs create leak-proof seal.
  • Increased strength and superior quality.
  • Heat, chemical and wear-resistant.
  • UV stabilized materials for long life.

Special Note:  1/4" barbed fittings have the unique ability to be "snapped" into larger tubing after punching a 1/4" hole into the side of the larger tubing.  This creates a water tight seal and allows you to "tee-off" of larger diameter tubing using only 1/4" fittings and a hole punch. 

Fitting Size Acceptable Inside Tubing Diameter Fitting Use Max Operating Pressure
1/4" .170 inches Secondary zone water diversion and flow control, can be used as a dripper in gravity systems Up to 30 PSI
1/2" .570 to .620 inches Secondary zone water diversion and flow control. Up to 50 PSI
3/4" .805 to .820 inches Secondary zone water diversion and flow control. Up to 50 PSI
Product Specifications
Questions?
If you are not finding the information you need or the information on this page is confusing, please let us know so we can help you (and others). Thank you.