(Order in multiples of )
You can also...
3/4" Drip Zone Head Assembly
In Stock. Ships within 24 business hours, guaranteed.1 999999 1 1
In Stock. Ships within 24 business hours, guaranteed.
- Others Bought
3/4" Drip Zone Head Assembly for drip systems connects to most 24 volt irrigation controller and timers to turn your irrigation system on and off automatically, while cleaning the water and reducing the pressure of the system to 25 PSI. Drip Zone Head Assembly provides a superior flow performance over a wide range of pressures with low head loss.
Features and Benefits
- Professional quality solenoid with encapsulated "O" ring and replaceable tip with low power consumption allows extended wire runs
- Internal manual bleed
- Direction of water
- Pressure regulator body ABS
- Stainless Steel 303 spring
- Self-cleaning natural rubber diaphragm
- Valve body and cover made of nylon reinforced glass
- Polyester screen with very good resistance to alkali and bacteria, 155M-100 micron. Periodically remove and rinse screen to keep filter clean.
- Flush cap for easy flushing of system
- Filter body and cover polypropylene
- 3/4" AC in-line valve with internal bleed
- 3/4" Filter with 155 mesh screen to trap debris to 100 microns
- 25 PSI Preset Pressure Regulator
- Drip Adapter 3/4" FPT (Female Pipe Thread) X .700 OD (Outside Diameter)
- Instruction manual
Please note that this valve assembly does not provide backflow prevention. Please consult your local codes for specifics.